验厂咨询  SYSTEM
大客户专线
13798281568
体系认证-验厂辅导-深圳市通翔企业管理顾问有限公司【官网】
百思买(BestBuy)验厂

Bestbuy验厂辅导---(QAS/QMS)BBY工艺要求(检验报告)

发布时间:2018/9/12 14:54:02   发布来源:本站    作者:

  Section 6 – 检验报告 Inspection Report Requirement


  6.1供应商首检报告需包含如下信息 First article check report by vendor must include below information:


  6.1.1订单号,机种名,目的地,产线名,客户名,检验员,审核员等; Order PO#, Model Number, Destination, Production line, Customer, Inspector, Approval;


  6.1.2首件检查至少有 3PCS 包装成品检验信息及数据;First Article check need implement at least 3pcs products;


  6.1.3记录所检产品序列编号,软硬件版本号及关键部品, 安规部品型号; Record inspected product S/N, HW/SW version, Critical & Safety Components Model Number;


  6.1.4首检报告检验项目应包括 First article check items should include:


  1) 产品的安全,功能,性能,外观,结构,内部装配工艺,包装,配件检查; Product safety, function, performance, appearance, structure, internal workmanship, package, accessory check;


  2)产品关键可靠性测试如老化(含高低电压),反极性测试(DC 供电产品),裸跌(便携式或户外产品),丝印质量测试等;Key reliability testing items for product such as burning testing (high/low voltage), Reverse polarity test (product with DC power supply), Bare unit drop test (portable/outdoor product),silkscreen quality testing etc.


  3)包装关键可靠性测试如运输振动测试,卡通箱跌落,个体包装跌落,挂钩,手提扣强度测试等; Key package reliability testing item such as Carton Vibration Test, Carton Drop Test, Individual Drop Testing, Hang Hole Strength Test, Portable buckle-handle strength test


  4)跟产品相关的兼容性测试; Product compatible test;


  5)产品与工程承认样品种&BOM核对; Confirm production product with BOM & approved engineering sample;


  6.1.6对于实测数据如电气性能亮度,响度,尺寸,重量,温度,功率,失真,频响,分离度等都需要记录 3 组具体数据; Measured data such as performance measurement e.g. brightness, loudness, dimension, weight, temperature, power, THD, frequency response, separation need be recorded with at least 3 products measurement;


  6.1.7首件检验的不良描述及问题严重程序的判定(如发现缺陷); Defect description for 1st article check and issue severity level judgment should be included in 1st article check report;


  6.1.8首件检验判定结果:符合/不符合/待定; 1st article check judgement should include conform/no-conform/pending;供应商按 LOT 的检验报告需要包含如下信息 Vendor inspection report by lot inspection need include below information:


  6.2.1订单号,机种名,目的地,产线名,客户名,总订单数量,当批次号,当批数量,检验员,审核员等 Order PO#, Model Number, Destination, Production line, Customer, Whole PO# Quantity, Lot number, lot quantity, inspector, Approval;


  6.2.2抽样标准,方案及 AQL 水平;


  6.2Sampling inspection standard, plan and AQL level;


  6.2.3记录检验产品序列编号,软硬件版本号; Record S/N for inspected products, SW/HW version


  6.2.4不良产品记录包括:序列号,问题严重程度判定,问题点描述,总缺陷数统计等;NG product records should include S/N, issue severity level, issue description, total defect statistics;


  6.2.5 LOT 检验结果判定:接收/拒收/待定; Lot inspection result judgement: Accepted/Rejected/Pending;


  6.3BBY 自验货报告 -按 BBY 要求填写; BBY self-inspection report: Fill report by BBY report requirement.

点击咨询

本文作者:通翔验厂认证企业管理顾问

本文地址:

版权所有 转载时必须以连接形式注明作者和原始出处

Tags标签:
0

立即咨询通翔认证验厂专家

13798281568立即在线咨询

相关资讯

    暂无相关的资讯...

Copyright © 2010 - 2014 All Rights Reserved 通翔企业管理顾问 版权所有

粤ICP备17069828号